Diamond drill

Loading...

Display all pictures

66,37 €

Reference: Trou, hole 44 mm 75 mm

Diamond drill for flat glass drilling

Data sheet

Tools : Professional diamond core drill for flat glass drilling
Tool position on the machine : Core drill 44 mm
Tool manufacturing time : 18 or 20 days
Crown : Diamanted continuous crown
Grit size (diamond or abrasive) : 80/100 Mesh (FETA D181)
Bond : Metal alloy
Machine : Manual or half automatic drilling machine
Width diamond crown : 1.1 mm
Diamond part length for the core drill : 10 mm with +/-10 % précision
Total length : 75 mm. Total lenght of the diamond core drill. From the 1/2 gas fixing up to the top of the diamond crown
Fastening for this tool on spindle or on tool holder : Yes with standard 1/2 gaz connection
Hole diameter, glass drilling : 44 mm
Machine spindles rotation speed : Spindle RPM for drilling 2400 +/- 5 %
Cutting angle on the top of the diamond crown : No
Lateral hole for water pressure decreasing on the core drill body : No.
Cooling during drilling for tool and glass or stone : Yes, from drill inside for a best cooling during drilling process
Individual packing : Yes for transport and stock
Up and down cycle during drilling : Yes useful for core drill over 30 mm diameter. To have a better cooling for glass and diamond core drill
Time for transport : On average 2 days depending your country
Kind of glass to use this tool : Cor drills for all kind of glass (float glass laminated glass ....)

Quantity:

More info

Delivered inside individual protection plastic cylinder. To prevent delivery problems.

Iron brass. Connection half inch. Precision on diameter +/- 5 %. The rotation speed for the spindles and the drilling speed are indicated in the technical information menu (on the left). Also available with length 95 mm. Other lengths available. Please contact our technical team (same selling price and delivery time than for 95 mm length).

COOLING WATER

In order to get the best diamond core drill glass cutting performances, a suitable quantity of cooling water need to be used, according to the diameter of the diamond core drills: REDUCE THE COOLING WATER PRESSURE WHEN THE DIAMONDCORE DRILL DIAMETER INCREASES.

For exemple a 6 mm diamond core drill need for cooling 4 liters per minute.

These diamond drills can be used on all the single ou double spindle flat glass drilling machines (Intermac, Bavelloni, Glaston, Schiatti, Lattuada, Zafferani, Besana.....) which have a 1/2 inche connexion and require a 75 mm length. Possible also on Janbac drilling machines which generally require 95 mm length.